Tools
- Firefly PRO LED Strobe
- MFG# 3970.3
- SOLAS
- USCG
- Manually activated
- Requires AA batteries, (Not Included)
- Carded
Condition:
NewWarranty:
30 Day WarrantyFeatures:
- The Firefly PRO Solas emergency strobe light boasts an all-new light output power management system that produces over 41 candelas of light per strobe for up to 56 hours of use (with AA lithium batteries).
- Using wide-light emission LEDs, it cuts through even the toughest conditions, creating a super-bright flash visible for over 3 miles.
Packaging:
RetailWhat you get:
One [1] Firefly PRO SOLAS LED Strobe, carded By ACR
- HemiLight 3 Automatic Survivor Locator Light
- MFG# 3764
- Attaches to most any lifejacket with up to 2" webbing
- Water activted
- On-Off switch
- SOS mode
- Up to 20+ hr. battery life
- Rounded edges to protect inflatable jackets.
Condition:
NewWarranty:
30 Day WarrantyFeatures:
- Smaller other approved lights
- The high-intensity flashing LED Light
- 20+ hour when in contact with salt or fresh water (manual or automatic activation)
- Easy deactivation (press of a button)
- Quick installation to any life jacket
Packaging:
RetailWhat you get:
One [1] HemiLight 3 Auto Survivor Locator Light By ACR
- Firefly PRO Waterbug LED Strobe
- MFG# 3971.3
- Strobe
- SOLAS
- USCG approved
- Manual and water activation
- Requires AA batteries (Not Included)
- Carded
Condition:
NewWarranty:
30 Day WarrantyFeatures:
Special water activation feature:
- Four activation modes including Armed, Strobe, Steady-On, and SOS
- Over 41 candela of a strobe light or over 26 candelas of Steady-On white light
- State-of-the-art wide light emission LED’s produce a 360º beam of light (41
peak candela) allowing for optimized visibility over 3.5 miles (5.6 km) - With a single set of AA alkaline batteries, the Firefly PRO will continuously
strobe for over 56 hours, or use the Steady-On feature for 28 hrs
Packaging:
RetailWhat you get:
One [1] Firefly PRO Water Activated LED Strobe By ACR
Everything you'll need to know to start your day off right is at your fingertips. With the weather forecast in graphical icons, you'll never wonder if you need an umbrella again. This weather station monitors indoor and outdoor temperature from up to 3 remote locations. You can put a sensor outside in your garden, in your wine cellar, and your baby's room and read all that information from the comfort of your bedroom.
Condition:
NewWarranty:
1 Year WarrantyFeatures:
- Weather Forecast with graphical icons
- Self-setting atomic clock in 12/24 hour format with time zone offset feature
- Ice Alert with Green LED light
- Month/Day calendar
- Monitors Indoor and Outdoor temperature and humidity
- Measure temperature from up to 3 remote locations (additional sensors required)
- Min/Max Temperature memory
- Weather trend icons bring trends to life
- Large LCD
- Orange EL Backlight for nighttime viewing
- Moon Phase
- Weather warning messages: Heat, Wind, Storm, Fog, and Frost
Main Unit Specifications
- Dimensions: 3.7" x 2" x 7.1"
- Weight: 0.53 Lbs
- Temperature range: -5°C to 50°C (23°F to 122°F)
- Resolution: 0.1°C (0.2°F)
- Signal frequency: 433 MHz
- Humidity range: 25% - 95%
- Humidity resolution: 1%
- Power: 3 x UM-3 (AA) 1.5 V batteries
Remote Unit Specifications
- Dimensions: 1.9" x 0.8" x 3.7"
- Weight: 0.13 Lbs
- Transmission range: 30 m (98 ft) unobstructed
- Temperature range: -20°C to 60°C (-4°F to 140°F)
- Humidity range: 25% - 95%
- Power: 1 x UM-3 (AA) 1.5 V battery
Packaging:
RetailWhat you get:
One [1] Oregon Scientific BAR208HGX Wireless Weather Station with Temperature Forecast
Forecasts the weather 12-24 hours in advance, displays indoor and outdoor temperature and sets itself to the US Atomic Clock Signal. In addition, this home weather station keeps track of your indoor humidity levels.
Condition:
NewWarranty:
1 Year WarrantyFeatures:
- Outdoor temperature up to 3 channels
- Ice Alert with Green LED light
- Indoor temperature and humidity
- Daily Hi/Lo memory for temperature and humidity (Toggle)
- Atomic Clock/Calendar
- Desktop only, no wall mount option
- Outdoor temperature range: -4 to 140 F (-20 to 60 C)
- Indoor temperature range: 23 to 122 F (-5 to 50 C)
- Indoor humidity range: 25 to 95%
- Signal frequency: 433 MHz
- Transmission range: 98 ft (unobstructed)
- Main unit power: 3 AA batteries (Not included)
- Remote sensor power: 1AA Battery (not included)
- Wireless remote temperature sensor included
Packaging:
RetailWhat you get:
One [1] Oregon Scientific BAR206 Weather Forecast Temperature Station, 433 Mhz Signal Frequency
Oregon Scientific THGN132N Thermo/Hydro Sensor Wireless Temperature and Humidity Sensor The sleekly designed Oregon Scientific Wireless Temperature and Humidity Sensor comes in an all-white waterproof housing with bright red located at the top center for easy visibility. This three-channel remote sensor measures both temperature and humidity, and it reports data back to your wireless weather station instantly.
- One AA battery included.
- Compatible units include the following: BAR208 BAR808 RMR500 RMR500ES RMS300
- RMS600 BAR908HG BAR628 BAR629 BAR688
- Measures temperature and humidity.
- 3 channel temperature sensor.
- Requires 1 AA battery.
- Additional or replacement sensor.
- Dimensions: 3L x 1.75W x 5.5H in.
- Oregon Scientific THGN132N Thermo/Hydro Sensor Wireless Temperature and Humidity Sensor
Condition:
NewWarranty:
1 Year WarrantyFeatures:
- Water-resistant design, wall mount or table stand back design, with LCD transmission indicator
- Remotely measures temperature & humidity with a transmission range of up to 30 meters (100ft)
- User-selectable Channels: 1, 2, 3
- This item comes with one year warranty through ELK Sales, Inc. USA partner of Oregon Scientific. For customer service please contact: elksalescs@gmail.com; (818) 626-8065
- Please make sure it is compatible with your weather station; https://www.oregonscientificstore.com/c-32-sensors-and-accessories.aspx
Packaging:
RetailWhat you get:
One [1] Oregon Scientific THGN132N Temperature and Humidity Sensor
- Additional or Replacement 3 Channel Temperature and Humidity Sensor for X Model Weather Stations
- Compatible with the following models: BAR208HGX, BAR206SX, RAR502X, RAR505SX, BAR800X, and RGR126X
- LED transmission indicator
- Water resistant design
Condition:
NewWarranty:
1 Year WarrantyFeatures:
- Temperature and Humidity Sensor for X Model Weather Station
- Additional or Replacement Sensor
- Measures Humidity: 25% - 95%
- Measures Temperature: -20 ° C / +60 ° C
- Water resistant design
- 3 channel sensor
- LED transmission indicator
The 3 channel sensor is only compatible with the following models:
BAR206X, BAR206SX, BAR208X, BAR208SX, RAR502SX, RAR502X, BAR800X, RGR126X
Please note: It is only compatible with the above models. It is not compatible with older versions or the WMR professional weather range
Packaging:
RetailWhat you get:
One [1] Oregon Scientific Replacement 3 Channel Temperature and Humidity Sensor for X Model Weather Station, THGR511
Our Newest Wireless Rain Gauge with Outdoor Temperature and Ten Day Memory is our favorite rain gauge. Having your very own rain gauge can be a fun and exciting way for you and your family to get involved with weather instruments. Rain gauges can also provide useful information to many outdoor enthusiasts. Sit back and enjoy the rain and check it weekly to find out if your lawn or garden needs additional watering.
The Benefits of a wireless rain gauge? To derive the best results from a rain gauge, proper placement is crucial. Choose an open space that isn't blocked by trees, walls, or buildings to place the gauge. To gain an accurate picture of the precipitation that has fallen, read and record the measurements each day at approximately the same time. At the end of each week, determine the amount of precipitation that has fallen by adding the daily totals. Simply put, know how much water you're using to water your lawn or garden.
Horticulturists love to measure the precipitation in and out of a greenhouse. Used as an invaluable tool to help farmers and landowners measure moisture. This is a great Rain Gauge for Home Owners, Farmers, Greenskeepers, Schools, Industries, Contractors, Airports, Orchardists, Hobbyists, Citrus Growers, Conservationists, Truck Gardeners, Government Agencies, Water Departments, Highway Departments, Agriculture, and Horticulturists.
Extremely accurate measurements! Increments of .04 Inches will allow you to know precisely how much water you are putting down. Avoid getting wet to monitor rainfall with the included wireless display unit. Data is transmitted from a football field away (Wireless transmission range up to 300 feet from PCR800 Wireless Self Emptying Rain Collector) (Up to 100 feet from remote wireless THN802 Wireless Temperature Sensor) All accessories included plus three AA batteries. Replace batteries every 12 months (use Lithium AA batteries for longer battery life and for temperatures that reach minus 22F or below.
Daily rainfall and cumulative rainfall history are stored over the past nine days on the main display unit for easy reference. This feature is cool. Set your High daily rainfall alarm so you know when to turn off the irrigation sprinkler for controlled watering. The four-line display of the main unit lets you see at a glance the Time, outdoor temperature, rain today, and collected rainfall total. The bonus is that it compliments any garden or yard décor.
Did you know? Plants need 1”-1.5” of water per week. Deep infrequent waterings are better than several light waterings. Deep Roots require less supplemental irrigation. Taller plants have deeper roots. Irrigation decisions are based on the soil water content.
Condition:
NewWarranty:
1 Year WarrantyFeatures:
- ACCURACY - Up to .04 inches (1.02 mm) in measurement when reading the rainfall collection
- WIRELESS - Wireless transmission up to 300 feet from rain gauge sensor to the main unit.
- TEMPERATURE - The temperature remote sensor can transmit up to 100 feet to give an accurate real-time reading. The main base unit also reads the room's temperature
- DATA COLLECTION - The unit stores up to 10 days of data so you can check for past rain history data
- TIME and DATE - Optional features to show time and calendar date
Packaging:
RetailWhat you get:
One [1] Oregon Scientific Wireless Rain Gauge Weather Station with Remote Sensor
Safety Essentials PPE Bundle Kit; Deluxe Edition. Includes: 5 White Face Masks, 20 Blue (3-Ply) Face Masks, 4 Hand Sanitizer (2oz each), Finger Pulse Oximeter, Contactless Infrared Thermometer.
Condition:
NewWarranty:
All Sales FinalFeatures:
- Safety Essentials PPE Bundle Kit; Deluxe Edition (includes Finger Pulse Oximeter + Contactless Thermometer)
- Included: 5 White Face Masks
- 20 Blue (3-Ply) Face Masks
- 4 Hand Sanitizer (2oz bottles each)
Finger Pulse Oximeter + Contactless Infrared Thermometer
Packaging:
RetailWhat you get:
Five [5] White Face Masks
Twenty [20] Blue (3-Ply) Face Masks (2 Packs of 10)
Four [4] Bottles of Hand Sanitizer (2oz each)
One [1] Finger Pulse Oximeter
One [1] Contactless Infrared Thermometer
Keep tabs on any potential fever with this Non-Contact Infrared Forehead Thermometer from CLOC. This thermometer is designed to be non-invasive. Simply hold it between two and six inches from a person's forehead and pull the trigger. Using infrared technology, a temperature reading will appear on the built-in backlit display in just one second. It's a useful solution for taking the temperature of fussy babies and small children but will work for the whole family. A 32-memory recall feature lets you monitor someone's temperature over time
Condition:
NewWarranty:
30 Day WarrantyFeatures:
- Non-Contact Temperature Taking
- Get Readings in Only 1 Second
- Recalls Last 32 Temperature Readings
- Built-In Backlit Display
Packaging:
RetailWhat you get:
One [1] CLOC Non-Contact Infrared Digital Thermometer
The DEWALT DCG412B 20V MAX Lithium-Ion 4-1/2" Cut-Off Tool features a 7,000 RPM motor that provides high power for cutting and grinding applications. A Quick-Change wheel release allows for tool-free wheel changes without the need for a wrench, and the tool-free guard allows for quick, easy guard adjustments/positioning. It offers a 2-finger trigger switch with lock-off button for convenient activation and easier gripping, along with a 2-position side handle offers greater control, comfort & versatility. Common applications include: Cutting metal, threaded rod, rebar with Type 1 cut off wheels, Finishing metal with wire stringer bead wheels, sanding flap discs, and Grinding metal with 1/8 and 1/4 hubbed or depressed center wheels.
Includes DCG412 Cut-Off Tool, Spanner Wrench, Type 1 (Cutting) Guard, 2-Position Side Handle. This is a bare tool item (battery sold separately).
Condition:
NewWarranty:
30 Day WarrantyFeatures:
- 8,000 RPM motor provides high power for cutting and grinding applications
- Quick-Change Wheel Release allows for tool-free wheel changes
- 2-finger trigger switch with lock-off button
- 2-position side handle for greater control, comfort & versatility
- Battery & Charger Sold Separately
- *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
Packaging:
RetailWhat you get:
One [1] DCG412 Cut-Off ToolOne [1] Spanner Wrench
One [1] type 1 (Cutting) Guard
One [1] 2-Position Side Handle
- Aqualink View 406 GPS PLB (PLB-350C)
- MFG# 2884
- LED Status display
- 32 hr battery, internal GPS
- LCD strobe light, buoyant
- GPS acquisition test
- Belt clip
- Lanyard
- Waterproof to 5m.
Condition:
NewWarranty:
30 Day WarrantyFeatures:
The AquaLink™ broadcasts a unique registered distress signal that not only
tells rescuers where you are, but who you are. The onboard GPS can fix
your position to within 100 meters and then utilizes a powerful 406 MHz
signal to relay your distress call to orbiting satellites.
- Self-test and GPS test features
- Typical performance: 35 hours
- Non-hazmat battery
- Made in the U.S.A.
- Aqua-Link View (2884) has an LED display
- No subscription fees
- Floats
- Super bright LED strobe
- On board 66 channel GPS
Packaging:
RetailWhat you get:
One [1] PLB, AqualinkView, GPS/Strobe/Disp./32hr By ACR
DEWALT’s DCL040 20-volt max LED flashlight features added lumens for brighter visibility as well as a pivoting head and hands-free capabilities—all of which combines for a versatile and durable work light that’s ideal for any workshop, garage, or job site.
DEWALT’s line of 20-volt max lithium-ion tools features improvements in engineering and design to provide the performance, the ergonomics, and the innovation that contractors require. When paired with the 20-volt max 3.0 Ah lithium-ion battery (not included), the DCL040 provides up to 11 hours of light output.
Pivoting Head
Multitasking has never been easier than with the DCL040, which has a 120-degree pivoting head with 11 detent positions, extending the range of visibility and optimizing the light projection angle.
Bright LED
With 110 lumens that deliver bright white LED output, the DCL040 allows the user to easily differentiate between colors and help reduce shadows; as an added benefit, the LED bulb creates less heat than conventional Xenon bulbs, improving energy efficiency and user safety.
Hands-Free
The integrated hang hook allows for hands-free capability—hang it from rails, hooks, shelves, pegs, and other surfaces to spotlight your work area.
Condition:
NewWarranty:
30 Day WarrantyFeatures:
- Bright LED output - 110 Lumens
- Integral hook for hands-free use in multiple placements
- Head rotates 120 degrees
- Low heat output compared to Xenon lights
- Efficient LED bulb improves run-time
- 11 - 25 hours of run-time depending on battery amp hour
*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
Packaging:
RetailWhat you get:
One [1] DCL040 worklight (bare tool, batteries sold separately)Shop By
Weekly Top Sellers
